Time for a change to fibre.
Fusion Splicers / Cleavers.
|
|
,
We are now able to offer servicing and repairs to Eloik Fusion Splicers.
UK ELOIK dealer offering ELOIK 3 year warranty, IOT-68 2 Years.
Units available from the following trade agents.
Call for trade prices.
Difference between ALK-88 and ALK-88A is:-
Battery ALK-88A is 6800mAh (removable battery), ALK-88 is 5200mAh (built in type), the difference between capacity of battery means when fully chrged splicing count will be different.
Fibre magnification of camera is ALK-88A X:180, Y:360, ALK-88 X:160, Y:320. The different magnification means different display resolutions on screen.
The heating time difference: ALK-88 is 14 sec but ALK-88A 9 sec.
ALK-A3 belongs to lower level of product ALK-88 and ALK-88A, because it's body material are different, as you will see there are no protection bar on body of A3 and no protection on screen .
On site training day at a location of your choice for 4 people "Free of Charge" when you purchase any fusion splicer. Get trained by the UK Eloik distributor and also get 3 years warranty. Location conditions apply.
Product line from ELOIK ALK-A9L Fusion Splicer.
- Splicers based on cladding alignment - this is the most economical option; the splicer adjusts the mutual positions of their cladding (the standard diameter is 125 μm) to minimize the difference. Theoretically, such a method of positioning results in a weld having a slightly larger attenuation compared to other solutions, especially in the case of fibres of poor quality, where the core is not placed centrally with respect to the cladding. In practice, however, the fibres sold today are of high quality and in most cases the parameters of the splices performed with this method do not differ from results achieved with the use of other methods.
- Splicers with aligning geometric core positions - this method is used by the majority of splicers and many manufacturers and retailers wrongly describe them as devices with aligning (actual) core positions; the core geometry is obtained by optical means (visible light). The intensity of light in the fibre decreases as a function of depth, and with a given sensitivity and simple image analysis, it is possible to determine the approximate positions of fibre cores. This method has been optimized for good quality fibres, where the geometric position of the core is equivalent to its real position. When the core is embedded eccentrically, the parameters of the splice can be worse than in the case of fibre cladding alignment.
- Splicers with alignment of (real) core positions - it is the most professional and at the same time the most expensive solution. The devices using this method can automatically recognize the type of welded fibres and arrange them according to their real cores. Such welds are characterized by the best performance parameters. The welding machines utilizing this method are several times more expensive than devices based on the previous solutions. All Eloik Fusion Splicers are Core alignment type.