Cable Rod Kits & Accessory's

• Material - high tensile galvanised steel wire
• Larger sizes and special Triplex cable stockings are also available
• The stocking (sock) is connected at the end of the cable and can be used for cable pulling or supporting
• Also available in stainless steel wire or Kevlar
• Ideal method for supporting cables prior to cleating
• When installing cables, cable stockings (socks) are an invaluable piece of equipment and should always be used
• Can be used for pulling through ducting too
• Re-usable tool
• Usually used to pull medium to heavy cabling
• The double-eye design allows the cable you're pulling to be passed through the stocking so that the pull can be made at a variety of points down the cable.
• Break Tonne 0.75
• Cable size 6mm- 13mm

Handy Set - Four 500mm rods plus a 330mm Flexi-lead give you over two metres of reach and all four flexibilities. The three most frequently used attachments are included and remember that all the attachments from your main set can also be used. In restricted areas where full length rods are too unwieldy, or when predominantly routing short runs of cable you need the half-size Handy Set.

Standard Set - This set is designed for professional installers who want a no-nonsense tool. It is capable of overcoming most day-to-day cable laying problems, particularly in smaller domestic and commercial installations. The Classic Standard Set contains the four must-have cable handling attachments and five metres of rod in two flexibilities. It is an inexpensive introduction to the benefits of Cable Rod.

Super Beam - A super smart little torch with a powerful white LED beam that automatically lights up when you screw it onto a rod. Inspect cable routes, track and guide rods to target, identify distant objects, cable markers and obstructions. Just 12mm in diameter means small access so even if you have to drill a dedicated hole to illuminate your work area it’s no big deal to make good.

Super Rod have developed a solution for installing aerial cables, saving time and reducing ladder work. The X2 has been designed to traverse the more uneven surfaces such as roof ridge tiles etc.

• Material - high tensile galvanised steel wire
• Larger sizes and special Triplex cable stockings are also available
• The stocking (sock) is connected at the end of the cable and can be used for cable pulling or supporting
• Also available in stainless steel wire or Kevlar
• Ideal method for supporting cables prior to cleating
• When installing cables, cable stockings (socks) are an invaluable piece of equipment and should always be used
• Can be used for pulling through ducting too
• Re-usable tool
• Usually used to pull medium to heavy cabling
• The double-eye design allows the cable you're pulling to be passed through the stocking so that the pull can be made at a variety of points down the cable.
• Break Tonne 0.75
• Cable size 6mm- 13mm